Motlen metal pouring from the sides of the towers 7 minutes to collapse

Please see " NIST has no evidence, the official "Story" is DEAD"
Post #1 and see pix of obviously melted steel, also note that the picture shows box columns that have been unbolted, or possibly devices burnt out the bolts to facilitate the "collapse" event ... the abundance of instances where the ends of the box columns show no deformation at all but instead show bolt holes where the bolts were, but obviously no bolts, steel bends before it breaks so why is there not more evidence of stress to these box columns? Where all of the bolted connections to box columns unbolted in the process of clean up? after stress such as being ripped away such as was done in the collapse event, would the bolts function at all, or would the box columns have to be torch cut to separate the bits? There is so much about this whole scene that raises questions.

 

Again with the incredulity......understand that steel melts at 2600-2800 F,for steel to have been 'molten' in the pile would have meat enormous heat would have been transferred by convection through the pile.

More than just boots would have melted

 

And with that you attempt to negate the obviously melted
steel in the pile shown in the pix. also there is the mystery
of the box columns that appear to have simply been unbolted.
whats up with that?

 

there was no 'melted steel' in any picture of the WTC pile,save for that made from cleanup torches

 

This is a photo of a piece of steel that was inspected
by scientists and found to have been melted, and
most certainly not as a result of the clean up effort.

 

Yeah? So? What's it from?

 

its a rather famous pix, you haven't seen it?
anyhow its a piece of melted steel that was recovered
from ground zero.

 

So? What was it from? What was it originally?

 

Found to be melted my eye,two sections of it have been torch cut,not 'melted'

 

The molten flowing metal 7 minutes prior was what? (and please source your answer).

 

burning plastic looks like that, try taking a clear plastic drawer handle and start it on fire and watch it drip like that... be careful though, it's a definite fire hazard, on second thought don't try it at home

.

 

That wasn't plastic. That was metal. That much is quite obvious.

 

if you look hard enough, you can find many weird things in the aftermath of a huge disaster like this, some even found the cross Jesus was hung on added like a candle to a cake, sometimes it just means your looking to hard to find answers when there is no answers to be found.... nothign more

some even saw the devil there



.

 

wasn't obvious to me, what would make that much molten metal gather in one place.. now plastics, that would be easier to explaine

 

Prove it.

 

You first,what was it?

 

So you know better than the scientific team that examined it
and found intergranular melting caused by sulfidation.
have you personally examined this bit of steel?

 

Source this claim, please.

 

http://www.911research.wtc7.net/wtc/evidence/metallurgy/index.html

This is but one of many pages that report this phenomenon.

 

I looked at the picture,and I've been around long enough to recognize when something's been torch-cut,like that specimen

 

Same old assumptions based on incredulity

 

so in contrast to the individuals who had access to the
piece of metal, you look at a photo and pass judgement
on what happened to cause what we see..... good trick ....

- - - Updated - - -

So, do you have a counter claim by any reputable scientific source?

 

First intelligent statement I have read regarding this matter. Makes tons of sense and now I am curious as to what the opposition will offer against this statement.

 

It would have to happen in a uniform manner to
produce the result observed.

 

so your experience, beats the fact that the people
who actually had the piece of metal in their hands
could analyze it and discover traces of sulfur and
therefore draw conclusions about what happened.
and you can look at a picture and contradict the
results of chemical analysis (etc..... )

oh well ........